| อะไหล่(24 H)-ฟิโอนา |  |
| อุปกรณ์-ลี | |
| วัสดุสิ้นเปลืองการบํารุงรักษา - เจสสิก้า | |
Learn how to adjust reel holder tension and platform height to reduce feeding problems and jamming.
As you can see, the problem is photo. When feed label to pick up, the label stuck on the Non-stick platform.
Let’s see what reasons caused and how to quickly solve it!
Reason 1: The reel holder tension is too loose, causing the tape to slacken during the label-feeding process, which leads to feeding difficulties or jamming.
สารละลาย 1: Adjust the reel holder shown in the photo. Tighten the 3 screws to increase the resistance on the rotating shaft, ensuring the holder keeps the tape taut for smoother feeding.
Reason 2: The anti-stick platform is positioned too low, obstructing the forward movement of the labels.
สารละลาย 2: As shown in the image, loosen the red screw, then tighten the four orange screws. This will raise the height of the white platform by 0.2–0.5 mm.
Import Note: 4 orange screws, are inside of the holes. If the height is increased, the platform heights must be consistent.
Moreover, If your SMT label feeder cannot sense with your Hanwha pick and place machine SM481, just look this solution: How to sense Hanwha label feeder with pick&place machine.
