Yamaha feeder SS ZS I-pulse feeder calibration Unit KHJ-MD800-010

Part Number: KHJ-MD800-010 KHJ-MD800-000 Nombre del modelo: SS TUNE-UP STATION Product Name: Yamaha feeder calibration Unit Feeder Type : SS ZS I-pulse electric feeder JIG Tape steel: 8mm KJ3-MY072-10X JIG Tape steel: 12-88mm Optional Software install: With Computer and install software Lugar de origen: Japón Plazo de entrega: 7-10 Días

Un Yamaha feeder calibration unit is a specialized tool used to check, adjust, and maintain SMT feeders so they work with maximum accuracy on pick-and-place machines.

Here’s what it does and why it’s important:

Main Functions

1. Feeder Accuracy Testing

   • Measures if the feeder is advancing components at the correct pitch and position.

   • Detects feeding errors like over-advancement or misalignment before they cause placement defects.

2. Pitch Adjustment

   • Lets you set and fine-tune the feeder’s component pitch (e.g., 2 milímetro, 4 milímetro, 8 milímetro) without using the SMT machine itself.

   • Ensures the component is always presented in the exact spot for the pick-up nozzle.

3. Sensor & Mechanism Check

   • Tests the feeder’s optical and mechanical sensors to make sure they detect component tape holes correctly.

   • Identifies worn or dirty sensors that can cause misfeeds.

4. Preventive Maintenance

   • Helps you maintain feeder health and extend its life.

   • Early detection of worn gears, springs, or peeling mechanisms before they fail during production.

5. Production Efficiency

   • By calibrating feeders offline, you keep SMT machines running without interruption.

   • Reduces downtime caused by swapping and testing feeders directly on the machine.

Why It Matters in SMT Production

• A feeder that’s even slightly out of calibration can cause:

  • Misplaced components

  • Machine stops due to pickup errors

  • Higher defect rates and rework costs

• Calibrating feeders offline means your SMT line stays productive while feeders are being checked and adjusted in parallel.

💡 Example:
If a Yamaha i-Pulse F3 feeder is set to the wrong pitch (e.g., 2 mm instead of 4 milímetro), the calibration unit will flag it immediately, letting you correct the setting before it’s loaded onto the machine.

• 

  SMT stick feeder for FUJI NXT

• 

  Yamaha feeder SS ZS I-pulse feeder calibration Unit KHJ-MD800-010

• 

  Yamaha Hitachi GXH SIGMA G5S label feeder

• 

  Alimentador de etiquetas Cobot Alimentador robótico de etiquetas

• 

  Alimentador de etiquetas SMT para Universal GC60 GC120 AC72 GI11 Fuzion

• 

  Alimentador Hitachi Super Loading SL Alimentador de SL48085 SL48086 a prueba de polvo de 8 mm de carga automática sin empalme

• 

  Alimentador de etiquetas Yamaha alimentador de etiquetas electrónico SMT para etiquetas multicolumna de una sola columna

• 

  Alimentador automático de soldadura PREFORM para FUJI NXT Hanwha SM482 Panasonic NPM